877-764-3337 • 406-388-2377 • Mon-Fri 9am-5pm MST
Dobeck Performance   Dobeck YouTube   Dobeck Twitter   Dobeck Facebook   Made in the USA
Dobeck Performance Tuning Products


DOBECK PERFORMANCE NEWS - 2015 DAYTONA BIKE WEEK


Visit DP at Daytona Bike Week

See the NEW AXIS DYNO in Action!


If you are headed to Daytona Bike Week, don't miss this opportunity to see our newly released AXIS Dyno.

Who: DP dyno engineer, Jacob, will be working with Lloydz Motorworkz, Victory Motorcycles and Indian Motorcycles. 

What: The AXIS Dyno will be showcasing Lloydz supercharged Victory and the new Indian Motorcycle. DP will be running the Lloydz Victory motorcycle on the dyno every 30 minutes displaying the AXIS Dyno software and capabilities. 

When: Come see us from 10am-6pm starting Friday the 6th until the 15th.

Where: The DP AXIS Dynos can be found in the Victory & Indian sections at the Polaris booth. We will be located at the Northeast part of the speedway.

Call us for more information and details.
DP's, Bill Kirkpatrick, describes the AXIS as, "a radically new dynamometer."

"Simple Inertia Dynos are limited to examining a vehicle only during acceleration. Brake Dynos use some type of brake (usually a water brake or electrical brake) to hold the speed of the vehicle constant. Combinations of those, along with software to dynamically control the brake, attempt to provide a more realistic duplication of road conditions. The displayed power is the sum of each independently measured load: A force cell attached to the brake, the acceleration of the roller, the frictional losses of the bearings, etc. Unfortunately, each measurement introduces its own errors and the combination of them still doesn’t accurately reproduce real world conditions. Numerous other loads would be useful but are too difficult or costly to measure accurately, or simply vary too much to be repeatable. We have achieved a better way."
 
The AXIS Dyno allows you to quickly and accurately diagnose all running aspects of a vehicle. The AXIS Dyno brings a NEW standard of stationary road testing for motorcycles, trikes, scooters, ATVs, and UTVs, 

"Dynamometers are designed to measure the power of vehicles," Kirkpatrick continues. "They are used for vehicle and engine design, to develop new aftermarket products and diagnose problems for vehicle repair. Varying degrees of complexity have been used in an attempt to simulate road conditions such as wind drag, inertia (the weight of the vehicle), or climbing a hill."



Read about the Key Features of the AXIS Dyno HERE

Watch the AXIS Dyno in Action
HERE


TECHNOLOGY CENTER RESOURCES SUPPORT INFO LINKS ABOUT DOBECK
TFI (GEN 2) DP Catalog FAQ DP Articles Contact
EJK (GEN 3/GEN 3.5) Find Dealer EFI Installations Test Drive Series Facebook
AFR+ (GEN 4) Dealer Application EFI Tuning Press Releases Twitter
SAFR Diagnostic Tool Product Discounts Tech References DP Private Labels YouTube
AXIS Dyno Testimonials Competitor Comparisons Employment

 A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z 
Thank you for visiting DobeckPerformance.com where we provide power sport enthusiasts tuning electronics.

© 1997-2017 Dobeck Performance. All Rights Reserved. Privacy Policy